Limescale is the chalky deposit of calcium and magnesium left behind when hard water evaporates. It is a persistent cosmetic and efficiency problem in UK homes, rather than a health issue, but removing it requires the right approach to avoid damaging your bathroom surfaces.
Hard water is caused by dissolved calcium and magnesium in the supply. The hardness of your water varies heavily depending on the local geology in your area. When this hard water evaporates on your bathroom and kitchen surfaces, it leaves mineral deposits behind. This deposit is limescale.
It builds up steadily over time and leaves stubborn marks on sinks, baths and toilets. It also coats the heating elements inside your appliances, which shortens appliance life and reduces their efficiency. The UK drinking water regulations set no specific standard for water hardness, and it remains completely safe to drink.
The Drinking Water Inspectorate measures water hardness in milligrams per litre (mg/l) of calcium carbonate. Because hardness varies with local geology, you should ask your water company for an accurate reading for your address.
The table below shows the hardness bands from the Drinking Water Inspectorate.
|
Hardness band |
Calcium carbonate (mg/l) |
|---|---|
|
Soft |
Up to 100 |
|
Slightly hard |
100 to 150 |
|
Moderately hard |
150 to 200 |
|
Hard |
200 to 300 |
|
Very hard |
More than 300 |
Local readings will differ, so ask your water company for the figure for your address.
Taps, plugs and glass screens
Taps and plugs are where water tends to sit and evaporate, making them a hotspot for chalky deposits. For light water marks on taps, you can buff them out with white vinegar or glass cleaner and a microfibre cloth. Which? presents this as a short term fix.
Stubborn patches of limescale around taps and plugs require more focused treatment. You can use a commercial limescale remover, citric acid or distilled vinegar to break down the heavy crust. Before you apply any acid, you must check the manufacturer care instructions for plated or coloured taps, and apply your chosen solution to a hidden spot first to check it does not ruin the finish.
Glass screens also show water marks clearly. To clean the glass, you can wipe it down with a standard glass cleaner or a mixture of vinegar and water. However, experts note that citric acid is the preferred choice for cutting through the mineral deposits on glass shower screens.
Shower heads
A crusty shower head is a sign of limescale build up, and descaling it is a simple job.
Citric acid is the preferred method for this task because it is stronger than vinegar and does not leave a lingering smell, though white and distilled vinegar also work. To descale a shower head, dissolve 2 tablespoons of citric acid powder in about 1 litre of hot water. Make sure the water is hot but not boiling.
If you have a detachable shower head, simply unscrew it and submerge it fully in a bucket or bowl of the solution. If your shower head is fixed to the wall or ceiling, pour the solution into a large zip lock bag. Place the bag over the shower head so it is completely submerged, and secure it tightly at the top with an elastic band.
Leave the shower head to soak for about an hour. After soaking, wipe away the loosened deposits and run clean water through the head to flush out the remaining solution.
Toilets and brown stains
Toilets often develop hard water marks at the waterline and in the bottom of the bowl. Limescale also leaves marks on toilets.
Brown stains in toilet bowls and on shower floors can be treated with a white vinegar solution or a dedicated commercial limescale remover. Follow the instructions on the product if you use a limescale remover.
Heavy build up may need more than one treatment.
Surfaces that acid can damage
While natural acids like white vinegar and lemon juice are effective at dissolving calcium and magnesium, they are not safe for every surface in your home. When cleaning your bathroom and kitchen, remember these warnings about acid damage:
- Never use vinegar or lemon juice on natural stone surfaces such as granite or marble.
- Avoid using vinegar on stainless steel surfaces.
- Keep vinegar away from rubber parts, including dishwasher door seals and washing machine rubber.
- Never mix a commercial limescale remover with bleach or other cleaning products.
If you choose to use a commercial limescale remover instead of vinegar or citric acid, you must read the label carefully.
Mixing a limescale remover with bleach or other products can release dangerous gases and damage your surfaces. If you are unsure about what is safe, read up on products that are dangerous to mix before you start cleaning.
Slowing it down and water softeners
A squeegee is a simple way to cut down limescale in the shower.
You should squeegee the shower after every use to reduce limescale, watermarks, soap scum and mould. When you use the squeegee, focus especially on the glass doors and the corners of the shower enclosure.
Living in a hard water area means constant descaling can become tedious. Which? says constant descaling can become tedious.
If bathroom maintenance becomes too much of a chore, a water softener is something worth thinking about. Hard water is completely safe to drink in the UK, so a softener is about saving effort and not about health.
Hiring a cleaner for heavy limescale
A regular domestic cleaner visits your home on a repeat basis, usually weekly or fortnightly, and charges by the hour. A regular clean covers routine kitchens, bathrooms, floors and surfaces. Heavy, established limescale usually counts as deep clean work.
If your bathroom has a thick chalky crust around the taps or severe brown stains in the toilet, this falls under a deep clean. A deep clean tackles heavy limescale, grease behind the hob, the insides of appliances, skirting boards, door frames and the tops of cupboards. To understand the difference, you can read about what regular domestic cleaners usually cover.
If you are a tenant moving out, heavy limescale buildup can put your deposit at risk. The Tenant Fees Act 2019 bans landlords and letting agents in England from making tenants pay for professional cleaning. However, the tenant has a duty to return the home as clean as it was at the start of the tenancy.
Landlords cannot deduct for fair wear and tear, and the rules differ in Scotland, Wales and Northern Ireland. An end of tenancy clean is a whole-property clean working to a strict check-out checklist, often with a time-limited re-clean guarantee, and you should book it after all your belongings are out.
Cleaning prices and rules to check
If you decide to hire a cleaner to help maintain your home, providers operate either as a self-employed cleaner you deal with directly, a cleaning company that sends employed staff, or an agency that introduces a cleaner and takes a fee. Who supplies the cleaning products and the equipment varies, and this affects the final price.
The table below shows the expected costs for different types of domestic cleaning services.
|
Cleaning service |
Property size |
Typical cost |
|---|---|---|
|
End of tenancy clean |
Studio apartment |
£120 to £170 |
|
End of tenancy clean |
Five-bed house, outside London |
£550 to £700 |
|
Deep clean |
One-bed property |
From £180 |
|
Deep clean |
Four-bed house |
£400 to £600 or more |
|
Regular clean (outside London) |
Per hour |
£13 to £25 |
|
Regular clean (London and South East) |
Per hour |
£20 to £32 |
These are typical ranges for 2026 and not quotes. Deep cleans are also priced at about £25 to £45 per hour. End of tenancy cleans in London are roughly 25 to 40 per cent higher than the figures shown.
When getting quotes for a deep clean or an end of tenancy clean, make sure you check these details:
- Ask for a written task list so your expectations match what the cleaner will do.
- Check that the quote states the hours included and the number of cleaners attending.
- Confirm exactly what is excluded from the price, such as oven cleaning or carpet cleaning.
- Get like-for-like quotes and do not choose a provider based on the lowest hourly rate alone.
- Be aware that a low phone quote can easily rise on arrival if the condition is worse than expected.
Rules and protections when hiring help
According to GOV.UK, you are classed as an employer if you hire someone to work in your home and they are not self-employed or paid through an agency. An employer must pay at least the National Minimum Wage, check the right to work, run a payroll and hold employers' liability insurance. The National Living Wage is £12.71 an hour from April 2026 for those aged 21 and over.
If you hire a self-employed cleaner or use an agency, you do not have these employer duties. However, you should still ask for proof of public liability insurance as a sensible check before any work begins, so you are covered if a tap or a glass screen gets broken.
Under the Consumer Rights Act 2015, any cleaning service must be done with reasonable care and skill. If the cleaner leaves the shower head encrusted with minerals after promising a deep clean, you can ask for it to be put right. Services booked online or by phone normally carry a 14-day cooling-off period, but if you ask for the clean to happen inside that window, you pay for what was done.
For peace of mind regarding security, you can ask to see a basic DBS check. This is a certificate an individual applies for themselves. It costs £20 and covers England and Wales. You should also agree on how your keys will be stored if you are handing them over.
Common questions
Is hard water bad for my health?
No, hard water is completely safe to drink in the UK. The drinking water regulations set no standard for hardness, and the minerals present are just dissolved calcium and magnesium from local geology.
Can I mix limescale remover with bleach?
You should never mix limescale remover with bleach or any other cleaning products. Mixing these chemicals can release dangerous gases and cause damage to your bathroom surfaces.
Why is the limescale in my toilet brown?
Limescale leaves marks on toilets, and brown stains can be treated with a white vinegar solution or a dedicated commercial limescale remover.
Will vinegar damage my dishwasher or washing machine?
Vinegar can corrode rubber parts over time. You should avoid using it near the dishwasher door seal and the rubber parts inside a washing machine, and check the manufacturer instructions for proper descaling methods.
Next steps for your bathroom
To get your bathroom fixtures looking bright again and keep them free of chalky deposits, follow these steps:
- Decide the tasks, frequency and budget first if you are bringing in professional help.
- Test any natural acid or limescale remover on a hidden spot to check it does not ruin the finish.
- Dissolve 2 tablespoons of citric acid powder in about 1 litre of hot water to descale your shower head.
- Squeegee your glass shower screens and doors after every single use to stop the minerals settling.
- Ask for proof of public liability insurance and a written task list before hiring a cleaner for a deep clean.
- Book an end of tenancy clean only after your belongings are out and before the check-out inspection.
Dealing with heavy mineral deposits across a whole house is hard work, especially if the bathrooms have been neglected for a long time. If you want to hand the job over to a professional who can reset the property for you, you can find a house cleaner near you to get started.
Find a top rated house cleaner near you
2,942 house cleaners across the UK, each ranked on their Google rating and the number of reviews behind it. Start with your county: